High Pressure Filters

Move the pointer over the image
HIgh pressure filter 130109
HIgh pressure filter 130109
HIgh pressure filter 130109

Overview

HIgh pressure filter 130109

Cartridge filter with manual or automatic switching.
The double filter can be configured according to customer specifications.

  • Manual or automatic backwash
  • max. 350 bar operating pressure permissible
  • Filter finenesses from 25 µm
  • easy handling
  • easy to maintain

Area of application

In mining for highest demands

Request here

Product description

Product description

The filter housing contains two filter elements, which are flown through in parallel during regular filter operation, so that a high flow rate can be achieved with the lowest possible pressure loss.

The backwashing process is preferably triggered automatically by means of electrical control of the double solenoid valve, but it is also possible to trigger it manually directly at the valve.

By backwashing, the contamination retained by the filter elements is discharged from the inside of the filter via two separate filter outlets. Backwashing of the filter elements always takes place alternately, so that even during the backwashing process the medium is made available to the consumer without interrupting the filtration process.

Request here

Technical data

Technical data

Filter rating 25 µm - 500 µm
Medium to be filtered water, HFA, oil (hydraulic, lubricating and cutting oil), flame retardant low
viscosity liquids
Flow rate 211 g/min
Max. permissible operating temperature 80 °C/176 °F
Max. operating pressure 5076 psi
Design of filter elements laminated
Filter elements two separate
Nominal inlet and outlet width selectable
Nominal backwash width wählbar
Weight approx. 85 kg
Material stainless steel
Dimensions 385 x 295 x 130 mm