High Pressure Filters

Move the pointer over the image
Hochdruckfilter 130108A
Hochdruckfilter 130108A
Hochdruckfilter 130108A


High pressure filter 130107

The filter is used both as a single filter and in complex filter stations for the filtration of water and hydraulic fluid.

  • Most compact backwash filter with the largest filter surface on the market.
  • Can be backwashed automatically or manually
  • Multi filter element offers three times the filter surface of a comparable element.
  • Fast switching times
  • Newly developed 2/3-way valve ensures high flow and easy maintenance.

Request here

Product description


The filter housing contains a multi-filter element consisting of two segments, which are flowed through in parallel during filtration operation, thus achieving a high flow rate with the lowest possible pressure loss.

The filter is backwashed by a double solenoid valve. The backwashing process is preferably triggered automatically by means of electrical control of the double solenoid valve; in addition, there is the possibility of manual triggering directly at the valve.

The backwashing of the filter elements always takes place alternately, so that the medium is also made available to the consumer during the backwashing process without interrupting the filtration process.

Request here

Technical data


Filter rating 25 μm – 500 µm
Medium to be filtered water, HFA, oil (hydraulic, lubricating and cutting oil), flame retardant low
viscosity liquids
Flow rate 92 g/min
Max. permissible operating temperature 80 °C/176 °F
Max. operating pressure 5076 psi
Design of filter elements laminated
Filter elements two in one
Nominal inlet and outlet width selectable
Nominal backwash width selectable
Weight approx. 13 kg
Material stainless steel
Dimensions 150 x 200 x 100 mm